For subsequent layers, follow the instructions for parts 1 through 7 of this series, “Hemming the Underlayer”
Serge the raw edge on your overlock machine.
Press the hem up 1/2 inch.
Topstitch 3/8 inch from the folded edge.
Press the hem flat.
I have been busy listing things that have accumulated around the house.
Check out my listings on E-bay.
I have OSU (Ohio State University) Ties and a Pittsburgh Steeler Tie, and some new and used items.
Cut the fabric off at the new marks, or near the new marks (up to 1/2 inch away) if the hem need to be evened up (straightened).
There are a few different ways to proceed.
You can follow this method if you want a narrow rolled hem:
Or, if you have an overlock machine (serger), you can wait until tomorrow’s article.
When you have marked the entire underlayer, remove the pins and take the outer layer away.
Only leave one layer at a time on the ironing board.